홈 /제품 소개/셔어츠의 깃 블루투스 이어폰/FITHEM KS009G Neckband Earphone Factory New OEM CSR Chip Design Android Wireless Earbuds neckband wireless earbuds

FITHEM KS009G Neckband Earphone Factory New OEM CSR Chip Design Android Wireless Earbuds neckband wireless earbuds

1 Piece
MOQ
$13.00(1 - 10 pieces) $7.40(11 - 100 pieces) $6.80(101 - 999 pieces) $6.20(>=1000 pieces)
가격
FITHEM KS009G Neckband Earphone Factory New OEM CSR Chip Design Android Wireless Earbuds neckband wireless earbuds
풍모 갤러리 제품 설명 따옴표를 요구하십시오
풍모
제품 사양
Is wireless: No
Wireless Type: Other
Support Memory Card: No
Vocalism Principle: Hybrid technology
Volume Control: Yes
Control Button: Yes
Codecs: Sbc
Model Number: KS008D
Style: Neckband
Communication: Wireless
Use: Portable Media Player, Mobile Phone, Aviation, COMPUTER, Dj, Gaming, Sports, Audiophile, Travel, PROFESSIONAL, HEARING AID
Function: Waterproof, Microphone
Cord Length: 1
Waterproof Standard: IPX-5
Active Noise-Cancellation: NO
Product name: Wireless Earbuds
인증: ce
Bluetooth Standard: Bluetooth v5.0
기본 정보
인증: ce
Model Number: KS008D
결제 및 배송 조건
Packaging Details: 1 piece/box 40 Piece/CTN Carton size: 46.5*28*28.5 CM NET weight:3.7 kg Gloss WEIGHT:4.5 kg
제품 설명

FITHEM KS009G earphone factory OEM CSR chip new design wireless neckband earbuds spor bluetooth earphone

We are earphone factory, offer OEM 100% for amazon earphone brand seller. our OEM service is reputation in earphone industry. Since from 2019, we have our own brand FITHEM to offer better service for US ,INDIA market. welcome your contact!

KS009G electronic parameter

Item number
KS009G
Chipset
CSR
support profile
HFP ,A2DP, AVRCP
Bluetooth Range
10M
Driver Unit
Φ10MM
Speaker Impedance
16Ω
Power rate driver
13mw
Sensitivity
108dB
Power interface
Micro USB
Batty capacity
110mAh
Play time
About 6 hours (at80%volume)
Standby time
120HRS
Charging time
1-1.5hours
Packing & Delivery
1 piece/box 
40 Piece/CTN
Carton size: 46.5*28*28.5 CM
NET weight:3.7 kg
Gloss WEIGHT:4.5 kg
Name
mary
wechat ID:
15016781410
Title:
Sales Director
email:
mary@fithem.com
mobile:
8615016781410
Market:
India/EU/ASIA/USA
Send me request now!

Why choose us!

FITHEM earphone VS others
The front and back chambers of the ear shell are made of metal aluminum, and the front and rear chambers are combined with a metal rolling process. After the combination of the front and rear chambers, the firmness is strong and not easy to fall off.
The front cavity of the earphone of the ordinary earphone is made of ABS plastic material, and the front and rear cavity combinations are produced by the quick-drying glue process. After a long time, the weathering adhesive of the quick-drying adhesive becomes weak, and the front and back chambers have the hidden danger of falling off, and the quick-drying glue overflows during the rubbering process, which may cause the appearance of the adhesive of the ear shell to be poor.
Our products have a marking polarity on the speaker solder joints, which is convenient for the differential welding of the positive and negative poles of the horn during the operation to ensure the consistency of the polarity of the finished earphone horn.
The general earphone speaker does not identify the polarity, and the positive and negative poles of the speaker cannot be distinguished during the operation, and the polarity of the finished earphone speaker cannot be ensured.
Our product speaker can be flattened in the front cavity after being glued (there is a flat step in the front cavity of the hardware), and sealed with yellow glue on the periphery of the horn to ensure the consistency of the frequency response curve of the raw material horn test.
The general earphone speaker in the market is fixed in the front cavity by using EVA cotton. However, since there is no stepped fixed speaker in the front cavity of the plastic, during the operation, the speaker will leak after the unevenness, and the frequency response curve of the speaker test cannot be guaranteed. Consistency, so there are cases of large and small sounds.
1. The core of our product in the ear shell is knotted to ensure that the wire core will not shrink when the wire is pulled by force, reducing the risk that the solder joint will not be broken by external force. 2. After the wire is hit with a copper buckle at the tail plug, our company will add 717 rubber fixed copper buckle again to ensure that the wire will not loose when pushed inward.
similar products on the market, the core is not knotted, the wire at the tail plug only hits the copper buckle, and the wire is not glued again. When the wire is pushed inside, it will loosen, and there is also a hidden danger of shorting the speaker.
Our products are knotted in the wire of the central control SR, to ensure that the wire core will not shrink when the wire is pulled, reducing the risk of the solder joint being pulled off by external force.
Similar products on the market, the core of the SR is not knotted, when the wire is pulled, the core shrinks, and the solder joint has the risk of being pulled off by external force.
The back of our product's central control button is tarnished to prevent a small amount of water droplets or sweat from flowing into the interior of the button gap during use, causing damage to the Bluetooth board.
In general products on the market, there is no tarpaulin attached to the back of the central control button. A small amount of water droplets or sweat will flow into the gap of the button and cause damage to the Bluetooth board.
FITEHM Bluetooth board is coated with a nano-coating for waterproof protection. The nano-coating can be clearly seen on the surface of the board under UV irradiation.
Other products, the Bluetooth board has no nano-coating for waterproof protection, and the nano-coating is not visible on the surface of the board under ultraviolet irradiation.
Our products have UV glue on the solder joints of the products to protect the solder joints, reducing or eliminating the functional defects caused by solder joints falling off during subsequent use.
In the general products on the market, there is no UV glue on the soldering point of the Bluetooth board to protect the solder joints. The probability of functional defects caused by the solder joints not falling off during the subsequent use will be greatly increased.
Our product wire copper wire adopts the specification of 22*0.05mm over ES plus 200D yellow denier wire. The tensile strength test and bending experiment of the wire material have achieved strong protection, greatly reducing the inadvertent pulling and other actions in use. The chance of damage to the headphones.
SOn the market, the general product wire copper wire 8*0.08mm plus 100D nylon wire, the tensile test and bending experiment of the wire material are completely unprotected, and the chance of damage to the earphone caused by inadvertent pulling and the like in use is greatly increased.
Our products have detailed manufacturer, specifications, capacity, production date and other information on the battery, and the product safety and quality are guaranteed and traceable. At the same time, the battery protection board adopts the Seiko protection board, and the quality is further improved.
There are no detailed manufacturers, specifications, capacities, production dates and other information on the general product batteries on the market. There is no guarantee or traceability in terms of product safety and quality. At the same time, the battery protection board adopts a general protection board.
Our product Bluetooth board has added a self-recovery fuse. When overcurrent and overvoltage, the circuit automatically cuts off and effectively protects the Bluetooth board
The general product Bluetooth board on the market has very few self-recovery functions.
Our products adopt the CSR8635 program, and the mid-to-high-end solutions are mature and stable with low power consumption.
The general products in the market use Bluetooth schemes such as Jerry, and the relative CSR scheme is not mature enough and stable, and the power consumption is high.
KAIWANSI-profile

FAQ-KAIWANSI

Q: How I can get the sample?
A: Yes sure, you can place the sample order directly on Alibaba, or contact by email or wechat 
-------------------------------------------------------------------------------------------------------------------------------------------

Q: What is the lead time?
A:>Samples order: 1-3 days (based in we have in stock for the item you want)
A:>Bulk orders: 5-15 days after order confirmed
A:>OEM Orders:20-40 days the whole process from design to produce.
-------------------------------------------------------------------------------------------------------------------------------------------

Q:What should I provide for OEM projects?
A>We need artwork at AI, EPS, PDF etc to create e-proof base on your artwork within 1-2 days.
-------------------------------------------------------------------------------------------------------------------------------------------

Q.Can I get some backup piece?
A:>OEM order: Langstom company offer a few piece back-ups with freight cost collected.
A:>Wholesale orders: No free back-up piece. 
-------------------------------------------------------------------------------------------------------------------------------------------

Q: What is the MOQ?
A: MOQ is 40pcs for Neutral packing orders(1 carbon), and 1000pcs for OEM orders. 
-------------------------------------------------------------------------------------------------------------------------------------------

Q: How do you ship the goods? 
A: y DHL, UPS, FedEx or TNT according to area
-------------------------------------------------------------------------------------------------------------------------------------------

Q: Do you offer warranty for the products?  
A: Yes, we offer 12-month limited warranty. 

추천된 제품
우리와 연락하기
담당자 : Jecci
남은 문자(20/3000)
연락하기
방 E909, 9층, 595번, 큐지 하이테크 구역, 중국 시추안, 첸두
약
회사 소개 공장 투어 품질 관리 연락처
제품 소개
TWS 블루투스 귀기TWS 무선 전신 귀돌기TWS 노이즈 캔슬링 귀기 모든 카테고리
우리를 메일
귀하의 요구 사항을 알려주십시오. 최고의 제품을 당신과 연결하겠습니다.
사이트맵 │ 모바일 사이트 │ 개인 정보 정책
중국 좋은 품질 TWS 블루투스 귀기 협력 업체. © 2023 - 2024 twsbluetoothearbuds.com. All Rights Reserved.